1000M Long Range Remote Control Kit 8 Relay Output Feedback Function NO NC Relay Output

manuel http://einausschalten.com/0076799-d.pdf

• Relay Output: This receiver is dry relay output; it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
• Feedback function: 8-button remote control feedback function uses red and blue two-tone LED indicator lights. The remote control indicator light is red, the receiver has not received the remote control signal, and the receiver is not working; The remote control indicator light is blue, the receiver has received the remote control signal, and the receiver is working normally;
• wide voltage input: DC 12V-24V, channel:8 channels, coding method: Learning code, remote distance:1000m (in the free field) wireless control, easy to install. The range is about 500-1000m in the open air, it can simply pass through walls and so on. But please note: trees, walls or other obstacles will shorten the range.The product has 8 working modes.
• Pairing and testing: Before delivery, our technicians have paired and tested the remote control and receiver. When you receive it, you don't need to perform any other operations, just install it through the Wiring diagram. If you don't know how
• Signal stability and range: RF remote control uses RF technology and stable signal. The signal from the wireless RF switch can be routed to walls, floors and doors, and continuously control the receiver from any position with a reliable distance.The product has 8 working modes, you can adjust according to your own needs. The product is a relay output that can control devices with different voltages. We offer a one-year warranty service.

Package Include
1 x Receiver with antenna
1 x Transmitter
1 x User manual
1 x one year warranty

Receiver parameters
Working voltage: DC12~24V (wide voltage supply, power supply current ≥ 1A)
Standby Current: 16mA for DC12V Power Supply, 10mA for DC24 Power Supply
Working temperature: -20 ℃~+80 ℃
Sensitivity: ≥ -120dBm
5. Operating frequency: 433.92MHz
Control load: both AC and DC can be used
Load current: ≤ 7A
Board size: 120mm x 73mm x 18mm
Shell size: 125mm x 80mm x 30mm
Installation method: fixed by rail slot or screw

explanation working modes
Momentary: Press and hold -> On; Release -> Off.
Toggle: Press -> On; Press same button again -> Off·
Latched: Press -> On; Press other button -> Off.

Set Control Mode
A. 1-8CH Toggle: Press transmitter button"1" to learn.
B. 1-8CH Momentary: Press button "2" to learn.
C. 1-8CH Latch: Press the button "3" to learn.
D. Only 1CH Toggle, 2-8CH Momentary: Press button "4" to learn
E. 1-2CH Toggle, 3-8CH Momentary: Press button "5" to learn
F. 1-4CH Toggle, 5-8CH Momentary: Press button "6" to learn
G. 1-2CH Latch, 3-8CH Momentary: Press button "7" to learn
H. 1-4CH Latch, 5-8CH Momentary: Press button "8" to learn

Learning method and steps

1.Press the receiver's learning button until the LED indicator is on and then release the button. The recipient now remains in the status of Learn.
2.Then you can press the appropriate button according to your requirement.If the LED indicator flashes 1 times, it means that the learning is successful.

Delete the learned code
Press and hold the receiver's learning button for 8 seconds until the LED indicator is OFF (buzzer sounded for about three seconds), it means that all stored codes have been successfully deleted.