Other Products in IR 2 Channel ( 11 )12V learning infrared module / 3 button infrared remote control + 2 way remote control switch / 2 way infrared remote control switch
manuel: http://einausschalten.com/0058611-y.pdf
Product Introduction:
1 Working voltage: 12V Remote control power supply: A CR2025 button battery
2 VCC: power supply 12V + , GND: power supply 12V - CK=normally open, COM=common, CB=normally close, all of these three ports connect with output.
3 Size: 60*40*21mm, with two fixed bolt holes 4 Module Type: IR learning module 5 Working Mode: Support Jog control, Self-lock control and interlock control as you like. 6 Working Indication:
LED D2 light (Power indicator light) LED D3 light (Learning indicator light) LED D4-D5 light (Relay turn on/off indicator light)
How to set working mode? There are three buttons S1,S2 and S3 on the module. The output is low level. 1 Interlock: Press the “S1” then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is interlock control. (Press the button on remote, then relevant Channel of the relay module will work. But the other channels will stop output.) 2 Self-lock: Press the “S2” then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is self-lock control. (Press the button on remote, then relevant Channel of the relay module will work. press the button once again, then it will stop.) 3 Jog: Press the “S3” then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is jog control. (Keep pressing the button on remote, then relevant Channel of the relay module will work. Release the button, then it will stop.)
How to learn? Set 1st Channel learning : Step 1: Supply power to the module, press the S1 button once time, the indicator D3 light will flash 1 time. Step 2: Press the IR remote control(▲), until you see the indicator LED D3 light flash 3 times quickly.
Set 2nd Channel learning: Step 1: Supply power to the module, press the S2 button once time, the indicator D3 light will flash 1 time. Step 2: Press the IR remote control(▼), until you see the indicator LED D3 light flash 3 times quickly.
Set one key to control all two channels Step 1: Supply power to the module, press the S2S3 button once time, the indicator D3 light will flash 2 times. Step 2: Press the IR remote control(power button), until you see the indicator LED D3 light flash 3 times quickly.
Tips: 1 The receiver module only supports to learn NEC format 2 The instructions about the LED D2 light. Press one button of the module will flash one time; succeed in learning will flash three times; failed in learning will flash six times.
Order: We try our best to describe the products in details as possible as we could. If you still have the question, pls don't hesitate to contact us. Payment:
2.You can also pay the payment by MasterCard and VISA. (1) Choose to pay with your credit card in PayPal. (2) We will send you an email for the payment request, and you can pay for your order through that email by a MasterCard or VISA. Delivery: Returns: Customs duties or import taxes: (1) If you choose to transport by package, you don’t need to pay any customs fees. B2B: Customer oriented Service: Contact Us： Please contact us with any comments, questions or suggestions that you may have, we will be happy to assist you. Bulk Orders
Lejing Industry Development Co., Ltd.
Adresse: E-Mail: sale@einausschalten.com Whatsapp: +86 183 2644 0199 Phone number: +86 183 2644 0199 Youtube ID: Einausschalten |
