32 wireless remote control multi-channel remote intelligent switch 12V24V relay signal switch/adjustable frequency

Service：  sale@einausschalten.com

WhatsApp：   0086 183 2644 0199

Garantie ist 1 jahr.

Wide voltage input: DC 12V 24V, Channel:32 channels, Encoding method: learning code, Remote: 200m (in free field) wireless control, easy to install. The range is about 200M outdoors, it can easily pass through walls and so on. But please note: trees, walls or other obstacles shorten the area. The product has six working modes.

Signal stability and range: RF remote control uses RF technology and stable signal. The signal from the wireless RF switch can pass through walls, floors and doors and control the receiver continuously from any position at a reliable distance. The product has 5 working modes that you can adjust according to your own needs. The product is a relay output that can control devices with different voltages.

Before delivery, our technicians paired and tested the remote control and receiver. Once you get it, simply install it via the wiring diagram. If you do not know how to wire, please contact us.

Easy to control+dry contact signal: You can learn multiple remotes, and multiple remotes can control one receiver. No Interference: Using Digital Encoding, In the same environment where multiple product groups of the same model are used, the products do not interfere with each other. The radio receiver is a relay output / potential-free, with NO, NC, COM, (Normally open+Normally closed+Common terminal).

The product has stable performance, small size and high reception sensitivity. It has many applications, especially suitable for wired door and window controls and anti-theft alarm systems to realize the change from wired to wireless systems. Used in industrial control and safety fields: such as lamps, electric doors, fans, motors, lifts, gates, remote controls, etc.

Receiver parameters

Working voltage: DC12~24V

Working temperature: -30 ℃~+80 ℃

Sensitivity: ≥ -112dBm

Operating frequency: 868-932MHZ

Load current: Each 10A channel, recommended within 7A when the control motor is within 2A

Receiver size: 300*125*50mm

Transmitter Size: 195*65*25mm

Working mode

Toggle switch function (Press/Open; Press/Close again.)

Momentary (button function, press and hold-> Open; Release and close.)

Latched (Press ->Open; Press other Close button.)

Set Working Mode

Mode 1

Momentary+All ON: press the Learn button once. After the LED display is turned on, press 1 button on the remote control, After the LED display was lit, the code was successful.

Mode 2

Toggle+All ON OFF: press the Learn keys once. After the LED indicator is turned on, press 2-button on the remote control. After the LED indicator lights up, the code was successful.

Fashion 3

Latch+All OFF: press the learning keys once. After the LED indicator is turned on, press 3-button on the remote control. After the LED indicator lights up, the code was successful.

Fashion 4

Half Momentary, half Toggle; (Only All OFF works for Toggle): press the learning keys once. After the LED indicator is turned on, press 4-button on the remote control. After the LED indicator lights up, the code was successful.

Fashion 5

momentary no All ON: press once learn keys. After the LED indicator is turned on, press 5-button on the remote control. After the LED indicator lights up, the code was successful.

Mode 6

Toggle none All ON and OFF: press once learn keys. After the LED indicator is turned on, press 6-button on the remote control. After the LED indicator lights up, the code was successful.

Delete Code: Press and hold the learn button until the light turns off.

If you need to change the working mode, you need to delete the previous working mode first.