12 Channels High Range 500M Radio Ignition System with Box for Pyrotechnics Wedding Decoration Machine Balloon Remote Control Fireworks Fire System Transmitter Effect Special

Scope of delivery

1 x Fireworks Ignition Controller

1 x Transmitter

1 x Instruction manual

Feature

Wireless control, easy to install.

Can light various electronic fireworks directly, or light normal fireworks through an electric lighter. This reduces skin burning and accidental explosion.

Disposable electric ignition head and reusable electric ignition head are optional.

Each channel of the ignition control device can light several fireworks at the same time.

A transmitter can control many ignition devices simultaneously.

You can use the transmitter/remote control to control the igniter from anywhere within a reliable working distance.

The radio signal of the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.

More reliable than a fixed code application, the transmitter uses learning code EV1527, which rises to 1 million codes, to reduce the possibility of collision and unauthorized testing of codes.

With an external telescopic antenna, the ignition control device has a further working area.

Working distance: 500m (Theoretical)

Ignition control device:

Channel: 12 CH (Each channel can light several electronic fireworks at the same time.)

Power supply: 12 VDC / 220 VAC

Output voltage: 12 VDC (at 12 VDC input) or 50 VDC (at 220 VAC input)

Operating frequency : 433.92 MHz

With test function and manual operation mode.

Plug Type: European Standard; American standard; British standard; Australian standard.

Operating Temperature: -20°C ~ +70°C

Case size : 25 x 17 x 13 cm

Weight: 1.5KG

Transmitter:

Keys : 12 Keys

Operating voltage: 12V (1 x 23A -12V battery, can be used for 12 months)

Operating current: 8mA

Operating frequency : 433.92Mhz

Encoding: EV1527 learning code (up to 1 million codes, reduces the collision of codes.)

Remote control distance: 500m (theoretical)

If you extend the telescopic antenna, the working range will expand, the working range is twice as large as before.

Unit size: 128 x 37 x 12 mm

Operation:

1. Test the ignition control device for fireworks:

1) Connect the 220VAC power supply to the AC input socket of the controller, or connect the 12 VDC power supply to the DC input terminals of the controller.

2) Turn on the power switch on the controller and set the function switch to the <Test> position.

3) Press the 12 buttons on the controller or remote in succession. If the corresponding signal LEDs blink one after another, this means that the ignition control for fireworks is in good operating condition.

2. Connect the fireworks:

1) First turn off the power switch on the controller.

2) Connect two wires of each electronic fireworks with the red and black terminals of each channel; or connect an ordinary fireworks fuse to the electric ignition head and then connect the electric ignition head to the red and black connectors.

3) If you want to connect multiple fireworks to the same channel, please connect them in row or parallel with the same black and red connectors.  (Suggest the serial switch)

4) Turn on the power switch on the controller when 12 signal LEDs light up, this means that all fireworks connections are correct.

3. Fireworks:

1) Turn on the power switch on the controller and set the function switch to the position <fire>.

2) Press any button on the remote or controller and the corresponding fireworks will be lit.

Note: Please make sure that the controller's power switch is turned off when connecting an electronic fireworks or electric ignition head to the controller