6 Channels High Range 500M Radio Ignition System Wedding Decoration Machine Remote Control Fireworks Fire System Transmitter

Scope of delivery :

1 x Fireworks Ignition Controller incl. battery

1 x Transmitter incl. the battery

1 x Instruction manual

Feature:

Wireless control, easy to install.

Can light various electronic fireworks directly, or light normal fireworks through an electric lighter. This reduces skin burning and accidental explosion.

Disposable electric ignition head and reusable electric ignition head are optional.

Each channel of the ignition control device can light several fireworks at the same time.

A transmitter can control many ignition devices simultaneously.

You can use the transmitter/remote control to control the igniter from anywhere within a reliable working distance.

The radio signal of the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.

More reliable than a fixed code application, the transmitter uses learning code EV1527, which rises to 1 million codes, to reduce the possibility of collision and unauthorized testing of codes.

With an external telescopic antenna, the ignition control device has a further working area.

Working distance: 500m (Theoretical)

Ignition control device

Channel: 6 CH (Each channel can light several electronic fireworks at the same time.)

Power supply: 6 x 1.5 V AA batteries (not included)

Current: ≤ 6mA

Operating frequency : 433.92 MHz

Operating Temperature: -20°C ~ +70°C

Housing size: 115 x 75 x 50 mm

Transmitters

Keys : 6 Keys

Operating voltage: 12V (1 x 23A -12V battery, can be used for 12 months)

Operating current: 8mA

Operating frequency : 433.92Mhz

Encoding: EV1527 learning code (up to 1 million codes, reduces the collision of codes.)

Remote control distance: 500m (theoretical)

If you extend the telescopic antenna, the working range will expand, the working range is twice as large as before.

Unit size : 85 x 36 x 16 mm

How to pair the remote control with the ignition controller

Note: We paired the remote control with the ignition control before leaving the factory.

1. Put 6 AA batteries in the battery compartment of the controller and turn on the power switch.

Use a small stick to press and hold the button in the small hole on the controller for 2-3 seconds, the power LED flashes, this means the controller goes into learning state.

3. Just press the button 1 on the remote control, the signal LED 1 and the power LED will flash, this indicates this means that the pairing was successful.

Operation

1. Test the ignition control device for fireworks:

Turn on the power switch on the controller and press 6 buttons in a row on the remote. When six signal LEDs flash in succession, this means that the ignition control for fireworks is in good working condition.

2. Connect fireworks

Turn off the power switch on the controller and connect two wires of each electronic fireworks to the red and black terminals of each channel, or plug an ordinary fireworks fuse to the electric ignition head and connect the electric ignition head to the red and black terminals, then turn on the power switch on the controller. If six signal LEDs are lit, this means that all fireworks connections are correct.

3. Fireworks

Turn on the power switch on the controller, press any button on the remote, and the corresponding fireworks will be lit.

Note: Please make sure that the controller's power switch is turned off when connecting an electronic firework or electric igniter to the controller.