NEW TYP AC 110v 220V 4 channels bidirectional remote control FSK with feedback remote control receiver for long-distance anti-interference

Broad voltage input: 110～220V , Channel:4 channels, Coding method: Learning code, Remote distance: 200m (in the open field) wireless control, easy to install. The range is about 200M in the open field, it can just pass through walls and so on. But please note: trees, walls or other obstacles shorten the area. The product has six working modes.

Signal stability and range: RF remote control uses RF technology and stable signal. The signal from the wireless RF switch can pass through walls, floors and doors and continuously control the receiver from any position with a reliable distance. The product has 5 working modes that you can adjust according to your own needs. The product is a relay output that can control devices with different voltages.

Feedback Function+Service:You can observe feedback by the color of the remote control indicator light. Before delivery, our technicians paired and tested the remote control and receiver. When you get it, just install it via the wiring diagram. If you do not know how to wire, please contact us. We offer you 1-year warranty and technical service.

Easy to control+Dry contact signal: You can teach multiple remote controls, and multiple remote controls can control one receiver. In the same environment where multiple product groups of the same model are used, the products do not interfere with each other. The radio receiver is a relay output without potential, with NO, NC, COM, (Normally open+Normally closed+Common terminal).

The product has stable performance, small size and high reception sensitivity from. It has many applications, especially suitable for wired door and window controls and anti-theft alarm systems to realize the change from wired to wireless systems. Used in industrial control and security fields: such as lamps, electric doors, winches, motors, lifters, gates, remote controls, etc.

Feedback function

The remote control feedback function uses red and blue two-tone LED indicator lights. When using the remote control, the corresponding working status feedback from the receiver can be obtained by observing the indicator lights:

When you press the remote control, the remote control indicator light turns red, indicating that the receiver has not received the signal from the remote control and is not working;

When you press the remote control, the remote control indicator lights blue, indicating that the receiver has received the signal from the remote control and is working normally;

delivery

1*Recipient

1*3 M Antenna

1*Remote control (with battery; if you need extra remote control, please tell us)

Receiver parameters

Working voltage: AC110-230V

Standby current: approx. 10mA

Working temperature: -30 ℃~+80 ℃

Sensitivity: ≥ -120dBm

Operating frequency: 433MHz

Load current: ≤ 7A

Board size: 120mm x 73mm x 18mm

Installation method: fastened with screws

Working mode

Toggle switch function (Press/Open; Press/Close again.)

Momentary (button function, press and hold-> Open; Release and Close.)

Latched (Press ->Open; Press other Close button.)

Set Control Mode

Setting different control modes: (Realize different functions by learning the number of keystrokes, Must switch to learning mode)

We have set the receiver as a momentary control mode before delivery. If you want to use other control modes, do as follows or tell us the mode you need after ordering:

Momentany: (Press the learn button once to learn)

Toggle:(Press the learn key twice to learn)

Latched: (Press learning key three times)

Only 1 Toggle+2-4 Momentary (press four times)

Only 1-Toggle+2-4 Latched(press five times)

1-2 Toggle+3-4 Momentary (press 6-times)

1-2 Toggle+3-4 Latched(press seven times)

1-2 Latched+3-4 Latched(press eight times)

1-2 Latched+3-4 Momentary (press nine times)

Momentary delay 3 seconds: (press ten times)

Remote control parameters

Working voltage: DC9V (battery life is about 6-12 months)

Standby current: 3,5uA

Working current: ≤ 25mA

Transmission power: ≤ 20dBm

Working temperature: -30 ℃ -+80 ℃

Remote control size: 155mm x 65mm x 27mm (without top antenna head)

Switching method: Turn on the switch (press until it turns on)

Range

Max. range in the open field: 300m (maximum range of the sensor/signal under optimal conditions, or in the open field, with free visual connection.)

Note

The hand-held transmitters have a range in the open field of about 300m. Buildings, interference radiation and interference fields reduce the range.

The control should not be directly sewn