One button to open and close / universal 8 channels wireless remote control switch exhibition hall lighting control switch 12v 24v 48v 72v remote control module

One button to open and close / Universal 8 channels wireless remote control switch exhibition hall lighting control switch 12V24v48v72v remote control module
 
delivery
1 * Receiver
1 x transmitter with battery
 
parameter
Remote distance: 100-300m in open field
Working voltage range of relays: AC110~240V or DC0~28V
Channel: 8 channels / 8CH
Working temperature: -20'C- + 70'C
Operating voltage: 9-72V DC
Maximum operating current: 10A
Working frequency: 433MHz
Encoding type: learning code
Standby current: ≤12ma at 9V; ≤9mA at 12V; ≤6mA at 24V; ≤5.5mA at 36V; ≤5mA at 48V; ≤5ma at 60V; ≤5mA at 72V;
 
characteristic
Wireless control, easy to install.
With learning button, you can easily erase or learn the code.
Relay switch can control DC or AC devices.
Application: lights, TVs, motors, fans, cameras, video signals, audio signals, electrically operated doors/locks/windows/blinds/cars or other devices.
You could turn on/off the receiver with transmitter(remote control) from anywhere within a reliable distance. The wireless radio signals can pass through walls, floors and doors
Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.
One/several transmitters can simultaneously control one/several receivers.
If you use two or more receivers in the same place, you can set them with different codes.
Wiring can be connected directly without dismantling the case. The bottom case is equipped with a card slot, which can be installed directly on the industrial rail, and the operation is very convenient.
One button to open, one button to close, more convenient.
 
Control mode description
Toggle (1 button on/same button off)
Latch (1 key on/another key off)
Momentary (button function, relay picks up as long as the button is pressed)
 
Set control mode
l 1-8 Momentary: press the learning button once, after the LED indicator is on, press any button on the remote control that needs to be paired, and the LED indicator on the panel flashes 3 times continuously to indicate that the learning was successful.
l 1-8 Toggle: press the learning button twice, after the LED indicator is on, press any button on the remote control that needs to be paired, and the LED indicator on the panel flashes 3 times continuously to indicate that the learning was successful.
l 1-8 Latch: press learning button 3 times, After the LED indicator is on, press any button on the remote control that needs to be paired, and the LED indicator on the panel flashes 3 times continuously to indicate that the learning was successful.
l (1-4 )Momentary + (5-8)Toggle: press learning button four times, After the LED indicator is on, press any button on the remote control that needs to be paired, and the LED indicator on the panel flashes 3 times continuously to indicate learning was successful.
l (1-2)Momentary+(3-4 )Toggle+(56,78 ) Latch: press learn button five times, After the LED indicator is on, press any button on the remote control that needs to be paired and the LED -Indicator on the control panel flashes 3 times continuously to indicate learning was successful.
 
Description about the control mode
momentary
------------ Press the transmitter button 1, the receiver relay 1. is ON, release button 1; Receiver relay 1st is off, same as 2/3/4/5/6/7/8. 8CH are independent.
 
toggle
--------------- Press transmitter button 1 for 1 time, the receiver relay 1st is ON, press button 1 again, the receiver relay 1st is off , the same 2/3/4 / 5/6/7/8. 8CH are independent.
 
latch
Press the transmitter button 1, the receiver relay1. is ON, relays 2/3/4/5/6/7/8 are OFF.
Press the transmitter button 2, the receiver relay2. is ON, relays 1/3/4/5/6/7/8 are OFF
Press the transmitter button 3, the receiver relay3. is ON, relays 1/2/4/5/6/7/8 are OFF
Press the transmitter button 4, the receiver relay4. is ON, relays 1/2/3/5/6/7/8 are OFF
Clear the code
Press the learn button 11 times, which means it will automatically erase all the remotes that have learned the code.
 
Range
Max. range in free field: 200m (Maximum range of the sensor/signal under optimal conditions, or in free field / with a free line of sight.)
notice
The hand-held transmitters have a range of approx. 200m outdoors. Buildings, interference radiation and interference fields reduce the range.
The controller should not be installed in the immediate vicinity of metallic surfaces. Strong local transmission systems (e.g. wireless headphones whose transmission frequency is identical to that of the controller can interfere with reception.)