Wide voltage DC 12V 24V 36V 6 channels Wireless remote control switch system 10A relay receiver + 6 buttons industrial waterproof high range

Manual: http://einausschalten.com/0060162-y.pdf

delivery

1 x receiver

1 x transmitter

parameter

Item Type: Switch

Remote distance: 200m

Features: DC12V input

Type of switch: remote control

Channel: 6 channels / 6CH

Working temperature: -40'C- + 80'C

Operating voltage: 12V

Maximum operating current: 10A

Working frequency: 315MHz / 433MHz

Sensitivity: ≥-105dBm

Encoding type: learning code

Size: 68mmⅹ48mmⅹ19mm

characteristic

Wireless control, easy to install.

With learn button you can simply delete the code or learn.

Applications: light, television, motors, fans, cameras, video signals, audio signals, electrically operated doors / locks / windows / blinds / cars or other devices.

You could turn the receiver on / off with a transmitter (remote control) from any location within a reliable distance. The wireless radio signals can run through walls, floors and doors

Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.

One or more transmitters can simultaneously control one or more receivers.

If you are using two or more receivers in the same place, you can set them with different codes.

Control Mode Description

Toggle (1 button on / same button off)

Latch (1 key on / other key off)

Momentary (pushbutton function, relay moves as long as button is pressed)

Set the control mode:

A. 1-6CH Momentary ----- Press the station key "1" to learn

B. 1-6CH Latch ----- Press the transmitter button "2" to learn

C. 1-3CH Toggle and 4-6CH Momentary-- - Press the transmitter button "3" to learn

D. 1-6CH Momentary ------ Press station key "4" to learn

E. 1CH Toggle, 2-6CH Momentary ------ Press station button "5" to learn

Description about the control mode

Momentary

------------ Press the transmitter button 1, the receiver relay 1. is ON, release button 1; The receiver relay 1 is off, the same as 2/3/4/5/6. 12CH is independent.

Toggle

--------------- Press the transmitter button 1 for 1 time, the receiver relay 1. is ON, press the button 1 again, the receiver relay 1 is switched off , The same 2/3/4 / 5/6. 6CH are independent.

latch

Press the transmitter button 1, the receiver relay1. Is ON, the relays 2/3/4/5/6 are OFF.

Press the transmitter button 2, the receiver relay2. Is ON, the relays 1/3/4/5/6 are OFF

Press the transmitter button 3, the receiver relay3. Is ON, the relays 1/2/4/5/6 are OFF

Press the transmitter button 4, the receiver relay4. Is ON, the relays 1/2/3/5/6 are OFF

etc..

Learning and steps

1. Press the receiver's learn button for two seconds. The receiver now remains in the status of TALK.

2. Then you can press the appropriate button according to your requirements. If the LED flashes twice, it means that the learning is successful.

Delete the learned code:

Press and hold the receiver's learn button for 8 seconds. When the LED light flashes twice and then off, it means that all stored codes have been successfully deleted.

characteristic

Wireless control, easy to install.

With learn button you can simply delete the code or learn.

Application: light, television, motors, fans, cameras, video signals, audio signals, electrically operated doors / locks / windows / blinds / cars or other devices of DC 12 / 24V or AC 230V voltage.

You could turn the receiver on / off with a transmitter (remote control) from any location within a reliable distance. The wireless radio signals can run through walls, floors and doors

Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.

One or more transmitters can simultaneously control one or more receivers.

If you are using two or more receivers in the same place, you can set them with different codes.