4-channel DC radio remote control Radio control system 12V 24V –4 button transmitter & receiver for light motor pump 433MHz relay switch

1-channel DC radio remote control Radio receiver Radio switch system 5V 12V 24V - 2 button Transmitter & receiver for light motor pump 433MNHz Relay switch Home / Industrial automation Radio remote switch

delivery

4 x receiver with housing

1 x transmitter with battery

characteristic

Wireless control, easy to install.

LED indicator: working status is clear at first glance, chip is more compatible with remote control of fixed code and learning code, easy to use.

With learn button you can simply delete the code or learn.

Application: light, television, motors, fans, cameras, video signals, audio signals, electric doors / locks / windows / blinds / cars or other devices.

You could turn the receiver on / off with a transmitter (remote control) from any location within a reliable distance. The wireless radio signals can run through walls, floors and doors

Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.

One or more transmitters can simultaneously control one or more receivers.

If you use two or more receivers in the same place, you can set them with different codes.

parameter

Item Type: Switch

Model: APDC-1

Operating distance: 200M

Features: Input DC12V / DC 5V / DC 24V

Working range of relay: AC110 ~ 240V or DC0 ~ 28V (relay output can control DC and AC devices)

Switch Type: Remote control

Channel: 1 channel

Working temperature: -10'C- + 70'C

Operating voltage: 12V

Maximum operating current: 10A

Working frequency: 315MHz / 433MHz

Sensitivity: ≥-102dBm

Encoding type: learning code

Size Receiver: 68mmⅹ48mmⅹ19mm

Transmitter Size: 50 * 34 * 17mm

Antenna: with internal antenna

Control Mode Description

Toggle (1 button on / same button off)

Latch (1 key on / another key off)

Momentary (pushbutton function, Relay pulls as long as button pressed)

Set the control mode

Toggle: Jumper on 1 and 2

Toggle: Press -> Open; Press again -> Close.

Press A, channel 1 is switched on, press again, channel 1 is switched off.

Momentary:  No jumper

Currently: Press and hold-> Open; Freed -> Close.

Press A, channel 1 is switched on, release button A, channel 1 is switched off. etc..

Latch: Jump to 2 and 3

Control mode Hooked: Press -> Open, other relays off; Press other key -> Close.

Press A, channel 1 is switched on; Press B button, channel 2 is switched on, and channel 1 is switched off. etc..

Learning and steps

1. Press the learn button of the receiver until the LED indicator lights up, the receiver now remains in the status of READING.

2. Then press any button within 20 seconds to emit the signal. If the LED flashes 1 time, it means that the learning is successful.

Delete the learned code

Press and hold the receiver's learn button for 6 seconds

reach

Max. Range in free field: 200m (maximum range of the sensor / signal under optimal conditions, or in the open field / with clear visual connection.)

Note

The hand transmitters have a range in the free field of about 200m. Constructions, interfering radiation and interference fields reduce the range.

The control should not be installed in the direct vicinity of metallic surfaces. Strong local transmitters (e.g., radio headphones whose transmit frequency is identical to the controller may interfere with reception.)