LORA technology industrial remote control switch wireless remote control driving remote control smart switch industrial control street lamp AC 220V DC12V / 24V 8000m range

delivery
1 x receiver
1 x transmitter with battery

feature
Wireless control, easy to install.
With the learn button you can easily delete or learn the code.
Application: lights, televisions, motors, fans, cameras, video signals, audio signals, electrically operated doors / locks / windows / blinds / cars or other devices.
You could switch the receiver with transmitter (remote control) on / off from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors
Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code.
One / more transmitters can control one / more receivers at the same time.
If you use two or more receivers in the same place, you can set them with different codes.
The product has a feedback function: when the remote control sends a signal, the indicator lamp lights up blue. When the receiver receives the signal, the receiver gives feedback to the remote control, the indicator lamp on the hand transmitter lights green and flashing.
LORA module, Internet of Things technology, visible distance of 8 kilometers, normal control on the 26th floor
Imported 32-bit single chip microcomputer with powerful functions, strong interference suppression and good stability

Item specifics
Item type: switch
Switch type: remote control
Operating voltage: AC85-250V OR DC12V / DC24V for selection
Operating temperature: -40'C ~ + 60'C
Encoding type: learning code
Working frequency: 433Mhz
Output mode: toggle, momentary, latch. adjustable by jumper
Size: 142 * 82 * 30mm
Remote control distance: 8 kilometers in the open area / 8000M
Usage: water pump motor, fish pond aeration, industrial control, driving control, agricultural irrigation, intelligent industrial control

Control mode description
Toggle (1 key on / same key off)
Latch (1 key on / another key off)
Momentary (button function, relay picks up as long as button is pressed)

Set control mode
Momentary: jumpers 2 and 3
Latch: jumpers on 1 and 2
Toggle: no jumper

Learning method
First press and hold the learn button and then switch on the receiver. When you hear a tone from "di" and then release it, the indicator lamp next to the button is always on, which means that it is in learning pairing status, and then press the button on the remote control. After a tone of "di" all four indicators are switched on and off, the learning pairing is finished

delete code
First press and hold the delete button, switch on the receiver and release it after two beeps. The deletion is complete.

If you have any problem, please tell us by email, our technician will help you.
Email: sale@einausschalt.com Tel .: +86 183 2644 0199

Range
Max. Range in free field: 8000m (maximum range of the sensor / signal under optimal conditions, or in free field / with clear line of sight.)
Information about real estate:
The handheld transmitters have a range in the free field of approx. 8000m. Buildings, interference radiation and interference fields reduce the range.
The controller should not be installed in the immediate vicinity of metallic surfaces. Strong local transmitters (e.g. radio headphones, the transmission frequency of which is identical to the control system, can interfere with reception.)

If you have any problem, please tell us
Email: sale@einausschalt.com
Tel: +86 183 2644 0199

Precautions
The control board should not be installed in locations with strong metal shielding so as not to affect the distance of the remote control
The antenna should be straight as far as possible and hang vertically upwards away from the sign
Do not use overvoltage or overvoltage to avoid burnout
Do not operate with electricity, switch on after installation