220v greenhouse roller blind winch remote control double capacitor motor forward and backward radio switch high performance

Product description
Application: roller shutters, roller shutters, projection surfaces, awnings, roller blind machine for greenhouses, telecontrol electric doors and windows, signal control, tower crane, pumps, cable winch, conveyor belts or other devices with AC220V motors
All remote control switch module products adopt digital wireless coding technology, no direction and the switches do not interfere with each other.
The board adopts high-quality double-sided PCB, power part adopts high-quality pure copper coil transformer. Power Part's performance is much higher than the commonly used inexpensive resistor-capacitance voltage-reducing circuit on the market, and it increases the life of the complete remote switch
Use 30A relays, no need to use an AC contactor, and can double capacitor motor directly within 3000W.

feature
With manual function: Can be controlled manually, if the battery of the remote control is empty or you have lost the remote control, you can use the manual function.
With limit function: You can connect limit switches, effectively preventing the burned motor from becoming.
The radio signal runs through walls, floors and doors. Wireless control, easy to install.
With the learn button you can easily delete or learn the code.
You could switch the receiver with transmitter (remote control) on / off from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors
One / more transmitters can control one / more receivers at the same time.
If you use two or more receivers in the same place, you can set them with different codes.

parameter
Operating voltage: AC185V ~ 240V
Working frequency: 315MHZ
Contact capacity: ≤30 A / 250 VAC;
Receiver sensitivity:> -114 dB
Range: 200-500M
Rated power: ≤3000W
Encoding type: learning type
Receiver size: 110 * 92 * 43mm
Control modes: momentary, latch (adjustable)
Learning code: Add the transmitter using the learning button on the receiver
Antenna: telescopic antenna (the total length of the antenna: 29cm, stroke length of antenna: 20cm)

Control mode description
Latch (1 key on / another key off)
Momentary (button function, relay picks up as long as button is pressed)

Learn
Press and hold the learn button for 3 seconds. When the power indicator is on, release your hand and press any button on the remote. The display flashes three times quickly, indicating successful learning

Delete the code
Press and hold the learn button for 10 seconds, the indicator flashes three times quickly and then release your hand, which means that you have deleted the code.

Range
Max. Range in free field: 200-500m (maximum range of the sensor / signal under optimal conditions, or in free field / with clear line of sight.)
Note
The handheld transmitters have a range in the free field of approx. 200-500m. Buildings, interference radiation and interference fields reduce the range.
The controller should not be installed in the immediate vicinity of metallic surfaces. Strong local transmitters (e.g. radio headphones, the transmission frequency of which is identical to the control system, can interfere with reception.)

Note
Protection function: If you change from forward direction to backward direction in latch control mode, you must first leave the motor, then you can change the direction.
If you press the forward button in momentary control mode, you must release 3 seconds before pressing the reverse button. which does not burn the engine.