Long distance AC 220V 1 Channel 3000 Meters High Performance Water Pump Radio Remote Control Radio Remote Control Wireless Remote Control Switch

Feature
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
High sensitivity:RXB8 module, sensitivity -114dBm, sensitivity and anti-jamming capability are far beyond super-renewable and ordinary superheterodyne modules on the supermarket, and the remote control distance is farther and more stable.
Wide voltage design: LM2596HVS switching power supply chip is used to ensure long-term stable operation of DC DC12V-48V.
High-power output: Use"Songle" 30A relay, control 180W when load power control 12V, 360W when control 24V, 500W when control 36V, 700W when control 48V.
Easy use:Wireless control, easy to install. Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place.
Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously. You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
With memory function: user can choose to have memory function (factory default without memory, if you need to contact us or take a message).

Working Range(actual Test distance: 2360M without obstacles in open space)
With a transmitter to form a complete set, the maximum working distance can reach 3000M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

Parameters:
Working voltage: DC12V-48V
channel: 1 channel
Working frequency: 315MHZ
Receive sensitivity: >-114dB
Control Modes: Toggle/ Momentary / Latch
Coding type: learning code
Maximum Working Current: 30A / each channel
Operating Temperature: -20 ° C to +70 ° C
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.
With total open / total off, centralized control function: the remote control of the receiving board can be equipped with multiple buttons to achieve one button full open / another key full off, and centralized control can achieve one control / more control one(This feature needs to contact us.).

Control mode
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

Set the different control modes:
Toggle: Jumper on "T-PIN" + Middle PIN
Momentary: Jumper on "M-PIN" + Middle PIN
Latch: without jumper

Learn method: Press the learn button once, the indicator lights up. At this time, press the button on the remote control, the indicator light goes out and the learn is successful.
Clear code:Press and hold the learning button for 8 seconds, the indicator lights up, then goes off, which means that the clear code is successful.