12V 3000m Long distance Four channels Wireless remote control switch Relay output Remote control NO / COM / NC

Feature

Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.

High sensitivity:RXB8 module, sensitivity -114dBm, sensitivity and anti-jamming capability are far beyond super-renewable and ordinary superheterodyne modules on the supermarket, and the remote control distance is farther and more stable.

Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally open / normally closed), which serves as a switch.

Small size: small size, circuit board size is only 46*38*20mm, suitable for various modifications.

Wireless control, easy to install. Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place.

You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.

Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously.

Working Range(actual Test distance: 2360M without obstacles in open space)

With a transmitter to form a complete set, the maximum working distance can reach 3000M in an open ground.

The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.

Parameters:

Working voltage: DC12V / 24V

channel: 4 channel

Working frequency: 315MHZ

Contact capacity: ≤10A/250VAC; 10A/30VDC

Receive sensitivity: >-114dB

Control Modes: Self-locking, Momentary, Interlocking

Maximum Working Current: 10A / each channel

Operating Temperature: -20 ° C to +70 ° C

Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Control mode

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,

Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,

Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

Set the different control modes:

Toggle: Jumper on "T-PIN" + Middle PIN

Momentary: Jumper on "M-PIN" + Middle PIN

Latch: without jumper

Learn method: Press the learn button once, the indicator lights up. At this time, press the button on the remote control, the indicator light goes out and the learn is successful.

Clear code:Press and hold the learning button for 8 seconds, the indicator lights up, then goes off, which means that the clear code is successful.

notice:In order to extend the life of the receiving board, we do not recommend controlling the high-power load. When controll 220V load, each channel control 500W, and when controll 12V, it controls 50W each channel