220V 18 channel wireless remote control switch 110V multi-function receiving controller relay module

feature

18 relay output switching signals has the operation indicator which allows the unit to be controlled to reach the forward and reverse speed of the motor, or the switch on / off switch and the requirements of various special control methods. Mainly used in electrical doors, windows, hoists, gates, elevators, industrial control and security industries.

Wireless control, easy to install.

With the learning button you can simply delete or learn the code.

Application: Lights, televisions, motors, fans, cameras, video signals, audio signals, electrically operated doors / locks / windows / blinds / cars or other devices.

You could turn on / off the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors

Reliable control: The transmitter (Encoding) and the receiver (decoding) use an 8-bit code.

One or more transmitters can simultaneously control one or more receivers.

If you use two or more receivers in the same place, you can set them with different codes.

parameter

1, Operating voltage: AC85-265V

2, quiescent current: ≤ 10mA

3, working temperature: -20 ° C - +70 ° C

4. Reception sensitivity: ≥-110 dBm

5, working frequency: 315MHz or 433MHz

6, control voltage: AC, DC optional / relay output / floating

7, the output current: ≤ 5A

8, pcb size: 164mmx89mmx18mm

9, the cup size: 186mmx93mmx33mm

Control mode description

Toggle (1 button on / same button off)

Latch (1 button on / another button off)

Momentary (relay function, relay energizes as long as button pressed)

Set control mode:

Toggle: If the receiver is in the state of LEARNING, press the button 1 of the remote control.

Toggle (channel 1 ~ 18): Press -> Open; Press again -> Close.

Press button-1, channel 1 is on, press again, channel 1 is off. etc..

Momentary: When the receiver is in the state of LEARNING, press button 2 of the remote control.

Currently (channel 1 ~ 18): Press and hold-> open; Share -> Close.

Press and hold button-1, channel 1 is on, release button 1, channel 1 is off. etc..

Latch: When the receiver is in the state of LEARNING, press the button 3 on the remote control.

Control mode Latch (channel 1 ~ 18): Press -> open, switch off other relays; Press another key -> Close.

Press button-1, channel 1 is on; Press button 2, channel 2 is on, and channel 1 is off. etc..

Toggle (channel 1-9) + momentary (channel 10-18)

When the receiver is in the state of LEARNING, press button 4 of the remote control.

Control Mode Toggle (Channel 1 ~ 9) + Control Mode Momentary (Channel 10 ~ 18)

Toggle (Channel 1 only) + Momentary (Channel 2-18)

When the receiver is in the state of LEARNING, press button 5 of the remote control.

Control Mode Toggle (Channel 1) + Control Mode Momentary (Channel 2 ~ 18)

ATTENTION: If you want to use other control modes, you need to clear the original modes.

Learning method and steps

1. Press the learn button of the receiver until the LED indicator lights up. The receiver now remains in the status of LEAVE.

2. Then you can press the button according to your request. If the indicator LED flashes 1 time, it means that the learning is successful.

Delete the learned code

Press and hold the learn button on the receiver for 8 seconds until the LED indicator turns OFF (buzzer sounds for about three seconds), it means that all stored codes have been successfully erased.

reach

Max. Range in free field: 200m (maximum range of the sensor / signal under optimal conditions, or in free field / with free line of sight.)