Other Products in Worm Gear Stepper Motor ( 4 )7.5: 1-80: 1 worm gear Stepper motor 80mm 4.5NM MD860 Aluminum RV040 RV050 Worm reducer with 86 stepper motor High-Torque
manual http://einausschalten.com/0066203-y.pdf
delivery 1 X MD860 Driver 1 X Stepping motor with worm gear 80mm 4.5NM
Product Information: Type: worm gear stepper motor
86 Worm Gear Stepper Motor Feature: High torque Low noise Efficient and precise Safe and durable
NMRV Worm Gear Characteristic: Products has aluminum alloy housing, and beautiful shape, compact design, small size, light weight and not easy to rust The internal unique design, good heat dissipation, safety and reliability, high efficiency The continuous improvement process has high load bearing capacity, smooth transmission, small vibration, low noise)
Product Size: Drive Size: 98 * 150mm Stepper motor size: 86 * 80
Product specifications of DM860 High performance, high torque, almost zero noise Speed is twice than the analog amount chip (analog quantity chip) Input voltage / input voltage: 24 - 80 VDC Output Current / Output Current: 2.8A - 7.2A Pulse Response Frequency: 200KHZ Optimization of engine noise function The DM860 is one of the two-phase hybrid stepping motor Drivern
Electrical Properties: Input power: 24-80V DC power supply Capacity: not less than 200 VA Typical values: DC36V Output current: 2.4A to 7.2A, 8-channel adjustable Resolution: 0.5A Drive: Dual constant current -PWM output drive Insulation resistance: Normal voltage> 500MΩ Weight: 485g
Environmental conditions : Cooling: natural cooling Working temperature -10 ~ 45 ℃; Storage temperature -40 ℃ ~ 70 ℃ Humidity: <80% RH, Humidity / Humidity: no condensation, no water droplets / No condensation, no water droplets Vibration: maximum not above 5.7 m / s2
Drive input signal Interface function / (port function): Signal interface PUL +,PUL- Pulse signal PUL+ is the positive end of pulses input pin PUL- is the negative end of pulse input pin
DIR+,DIR- DIR signal: DIR+ is the positive end of direction input pin DIR- is the negative end of direction input pin
ENA + and ENA- (ENABLE signal) ENA + is the positive end of the ENABLE signal ENA - is the negative end of the ENABLE signal
note: when VCC=24V, R=2K
Engine interface: A + and A- connect positive and negative terminals from the A-phase windings of the stepping motor B + and B- connect positive and negative terminals from the B-phase windings of the stepping motor When A, B two-phase windings are changed, the motor direction is reversed.
Power Supply Interface: Use DC power supply. The operating range of recommendations is 20V-50VDC, mains power is merh than 100 W. According to the actual use, input is not more than DC40V as the right choice.
Indicator: This driver has red and green two lights. The green light is used as the operating indicator. After switching on, the green light is always on. The red light is the failure indicator. Which is switched on during overvoltage and overcurrent errors. If the error is cleared, failure indicator is off. If driver has the problem, you need to re-power or re-enable / ENABLE to clear the problem. Order: We try our best to describe the products in details as possible as we could. If you still have the question, pls don't hesitate to contact us. Payment:
2.You can also pay the payment by MasterCard and VISA. (1) Choose to pay with your credit card in PayPal. (2) We will send you an email for the payment request, and you can pay for your order through that email by a MasterCard or VISA. Delivery: Returns: Customs duties or import taxes: (1) If you choose to transport by package, you don’t need to pay any customs fees. B2B: Customer oriented Service: Contact Us： Please contact us with any comments, questions or suggestions that you may have, we will be happy to assist you. Bulk Orders
Lejing Industry Development Co., Ltd.
Adresse: E-Mail: sale@einausschalten.com Whatsapp: +86 183 2644 0199 Phone number: +86 183 2644 0199 Youtube ID: Einausschalten |
